Crypto trade risk: position size, stops and costs
A promising target is one part of a trade. Orenix helps you examine it alongside the stop, entry and market conditions, so you can review the whole idea.

- 01Entry
- 02Stop
- 03Target
Start with entry, stop and target
Enter the pair and direction, followed by the trade levels. The review connects them into one scenario: where you plan to enter, what invalidates the idea and which move you are targeting.
Read risk/reward in context
R/R compares the distance to the target with the distance to the stop. The published BTC example had a ratio near 2:1; the ETH example was near 0.5:1. This structural comparison becomes more useful when considered with market context and execution conditions.
How to calculate trade risk and position size
Set a cash loss budget first, then size the position from the stop distance. This hypothetical spot purchase uses USDT throughout and initially excludes fees and slippage.
- Cash risk. For an account of 1,000 and a 1% limit chosen for this example, the budget is 1,000 × 0.01 = 10.
- Risk per coin. An entry at 100 and a stop at 98 give a stop distance of 2.
- Position size. 10 ÷ 2 = 5 coins. The purchase costs 500, while the calculated loss to the stop is 10. These are different amounts.
How fees change reward/risk
With entry 100, stop 98 and target 104, potential profit divided by loss before costs is 4 ÷ 2 = 2:1. Now assume a fee of 0.1% of each execution value and exact fills at those prices.
- Profit at the target per coin: 104 − 100 − 0.100 − 0.104 = 3.796.
- Loss at the stop: 100 − 98 + 0.100 + 0.098 = 2.198.
- Reward/risk after fees: 3.796 ÷ 2.198 ≈ 1.73:1.
With the same cash budget of 10, quantity before rounding becomes 10 ÷ 2.198 ≈ 4.5496 coins. Round it down to the exchange quantity increment. The fee is hypothetical; use your actual rates and an execution allowance for your own trade. Slippage and gaps can increase the loss beyond the calculation at the stop price.
Why a late entry needs a new calculation
If the entry moves from 100 to 101 while the stop stays at 98 and the target at 104, both distances become 3. The ratio falls to 1:1 before fees. To keep a cash risk of 10 before costs, quantity must fall from 5 to about 3.33 coins. Recalculate the idea at the current entry before comparing it with the Orenix assessment.
Use the assessment to refine your decision
Read the scenario comments: the issue may lie in the levels, a late entry or the market direction. Retain the original parameters so that later observations can be compared with the initial idea. Use demo/paper to observe the execution rules.
Review a trade within overall exposure
Compare one position's cash risk with existing trades. Several coins can respond together to BTC: different tickers do not establish independent risks. Adding calculated stop losses helps assess exposure, but does not guarantee a loss ceiling during gaps or slippage.
For contracts, also consider specifications, margin and liquidation. Leverage changes collateral requirements; it does not replace quantity and stop-loss calculations.
Using the tool
Can I review a setup without an existing signal?
Yes. Enter the pair, direction, entry, stop and targets manually.
Why might a high R/R still produce a weak setup?
A distant target may not fit the current direction and market conditions. Both levels and context matter.
Does R/R determine position risk?
The ratio of price distances does not determine account cash risk on its own. Consider position size and costs separately.
From a signal to demo: the Orenix walkthrough
Analysis helps assess a scenario but does not guarantee a trade outcome.
Put it into context
Case study · ETH/USDTWhen the target is half the stop distance
How R/R near 0.50 becomes a specific warning about the setup.
Read the case
Case study · BTC/USDT2:1 risk/reward. Why still WAIT?
The original levels, a retained Orenix response, and the direction that was not confirmed.
Read the case
Radar / Practical guideCrypto Trading Risk Management: Position Risk, Costs and Exposure
Separate stop distance, position size, cash risk and costs, then consider several trades together. Worked examples show how Orenix signal reviews fit into a broader risk-management process.
Read the guide
Radar / Trading costsMaker vs taker: how fees change a trade
Why a limit order can fill as taker and how to consider costs before entry.
Read the guide